Best Greenhouse for Snow Load: Published Ratings Compared
What is the best greenhouse for snow load?
Short answer: the best greenhouse for snow is one whose published snow load rating is higher than the ground snow load where you live, with a roof shape that sheds snow and a frame anchored to a solid base. Of the kits we sell, the highest published rating is on the Riga XL with its reinforcement kit: 64 lb per sq ft. Three BloomCabin models publish 43 lb per sq ft, and two KGT models publish 25 lb per sq ft.
This guide compares only ratings that appear on our product pages. Where a model has no published number, we say so instead of guessing. For a broader look at heating, glazing and crops in cold regions, read best greenhouses for Michigan and cold climates.
What "snow load" means
Snow load is the weight of snow a roof is designed to carry, stated in pounds per square foot (psf or lb/ft²). Wet, packed snow weighs much more than fresh powder, so the depth of snow alone does not tell you the load. Building codes set a design ground snow load for each area. Your local building department can tell you the figure for your address, and the free ASCE Hazard Tool lets you look it up by location. Compare that number with the greenhouse's rating, and remember that drifting snow and snow sliding off a nearby house roof can add more.
Snow load ratings compared
| Greenhouse | Published snow load | Published wind rating | Condition stated |
|---|---|---|---|
| Riga XL 6 or XL 9 with the Riga XL Reinforcement Kit | 64 lb/ft² | 135 mph wind burst | With the model-specific reinforcement kit installed |
| BloomCabin Aluminum Lean-To | 43 lb/ft² | 67 mph | When properly installed |
| BloomCabin Classic Accoya Fusion with Built-In Storage | 43 lb/ft² | 67 mph | When properly installed |
| BloomCabin T-Model Orangerie | 43 lb/ft² | 67 mph | When properly anchored on a level foundation |
| KGT Linea II | 25 lb/ft² (roof) | Not published on our page | Rated by KGT |
| KGT Santini II | 25 lb/ft² (roof) | Not published on our page | Rated by KGT |
| KGT Nelke 4 Pro | No psf figure published; three collar-beam turnbuckle supports, sandbag tested at 2,000 lb per KGT | Not published on our page | As reported by KGT |
Ratings assume the greenhouse is assembled to the manual and anchored to a proper base. If your area's ground snow load is higher than a kit's rating, choose a stronger kit, add the maker's reinforcement parts, or plan to clear the roof during every heavy storm.
Snow-shedding designs without a published number
Several of our strongest winter performers shed snow by shape. We do not list a numeric rating on their pages, so contact us and we will confirm the manufacturer's figure for your exact model before you order.
- Riga S, Riga and Riga Black: curved side walls that rise into the roof, so snow slides off instead of resting on a flat shoulder. Frames are 13-gauge aluminum, with 8 mm and 10 mm twin-wall polycarbonate. See our Riga greenhouse review.
- Janssens Junior Victorian and Junior Orangerie: a steep 38 degree roof that helps snow slide off.
- Janssens Royal Victorian: a 25 degree roof (22 degrees on the VI 46), with optional reinforcement parts for high snow and wind areas.
Five things that keep a greenhouse standing in snow
1. Roof shape and pitch
Steep and curved roofs shed snow; flat and shallow roofs hold it. A 38 degree Victorian roof or the Riga's curved profile lets snow slide off, while a low single-slope roof depends more on its rated strength. Leave room for snow to land where it slides off, and keep the greenhouse away from the drip line of a taller roof.
2. Frame and bracing
A rigid aluminum frame with stainless hardware resists bending better than a light tube frame. Makers sell bracing for snowy areas:
- Riga XL Reinforcement Kit for the XL 6 and XL 9
- Turnbuckle roof bracing for Janssens Victorian and Riga greenhouses
- Janssens rafter reinforcement inserts that slide into rafters and side wall studs
- Triangular roof supports for the Royal Victorian VI 46
- Livingten roof bracing set for high wind or snow areas
- Victorian sidewall wind straps for windy sites
3. Glazing
Multi-wall polycarbonate is light, impact resistant and insulating. Tempered glass is strong and stays clear, but a broken pane is not covered under the Janssens glass greenhouse warranty, so clear heavy snow promptly. For the full comparison, see glazing thickness explained.
4. Foundation and anchoring
A published rating only applies when the frame is anchored to a level, square base. In frost country, use a slab, footings or a perimeter wall designed for local frost depth so the ground cannot heave the frame out of square. Read greenhouse foundation options and the wall base guide.
5. Snow management
Brush snow off the roof with a soft broom after every heavy storm, working from the outside, and never let ice build up on vents. Read your warranty terms, since damage from extreme weather or snow left to pile up may not be covered, and treat clearing the roof as part of owning a greenhouse in snow country.
How to choose for your area
- Find your design ground snow load from your building department or the ASCE Hazard Tool.
- Shortlist kits whose published rating is higher, or that the maker can upgrade with reinforcement.
- Prefer a steep or curved roof, and plan bracing if you get wet, heavy snow.
- Budget for a proper anchored foundation.
- Check whether you need a permit, and ask us for the manufacturer's documents if your building department wants them. See our greenhouse permits guide.
Want to compare frames as well? The aluminum greenhouse kits collection groups every aluminum-frame model we sell, and our aluminum greenhouse kit buying guide explains what to look for. For the thickest glazing we sell, see insulated greenhouse kits, and for 200 sq ft and up, large greenhouse kits.
Frequently asked questions
What is the best greenhouse for heavy snow?
Among the kits we sell, the Riga XL 6 or XL 9 with its reinforcement kit has the highest published rating, 64 lb per sq ft with a 135 mph wind burst rating. The BloomCabin Aluminum Lean-To, Classic Accoya Fusion with Built-In Storage and T-Model Orangerie publish 43 lb per sq ft.
What snow load rating do I need?
At least the design ground snow load for your address, which your local building department can give you or you can look up with the ASCE Hazard Tool. Add a margin if your site gets drifting snow or snow sliding off a taller roof.
What greenhouse shape is best for snow?
Curved and steep roofs shed snow best. The Riga's curved walls and the 38 degree roof on the Janssens Junior Victorian and Junior Orangerie both help snow slide off instead of piling up.
Is polycarbonate or glass better in snow?
Both work on a strong, anchored frame. Multi-wall polycarbonate is impact resistant and insulating. Tempered glass stays clear but can break under impact. Whichever you choose, clear heavy snow promptly.
Should I remove snow from my greenhouse roof?
Yes. Brush heavy snow off with a soft broom after storms, even on a rated greenhouse. Ratings assume normal snow, and warranty terms may not cover damage from snow left to build up.
Do snow load ratings depend on the foundation?
Yes. Manufacturers state ratings for a greenhouse that is properly installed and anchored on a level foundation. A rating does not apply to a frame that is loose or out of square.
Can I add reinforcement to my greenhouse later?
Often, yes. Janssens rafter inserts, turnbuckle roof bracing and the Livingten roof bracing set can be added. The Riga XL reinforcement kit is model specific, so contact us about adding one to an existing XL 6 or XL 9.